Congratulations on acquiring your Ak-47 rifle! The Ak-47 is a reliable weapon that is simple to operate and maintain, making it a popular choice for both novice and experienced shooters. One of the most important aspects of maintaining your Ak-47 is to ensure that the rear sight is properly installed. The rear sight allows you to accurately aim and fire your rifle, so it is essential to make sure that it is correctly adjusted. Furthermore, a properly sighted rifle will enhance your shooting experience and allow you to hit your targets consistently.
In this article, we will provide you with step-by-step instructions to guide you through the process of installing the Ak-47 rear sight. We will also provide some troubleshooting tips in case you encounter any problems. Follow these instructions carefully, and you will be able to install the rear sight on your Ak-47 rifle quickly and easily.
Before you begin, gather the following tools and materials: – Ak-47 rifle – Rear sight – Screwdriver – Hammer – Punch – Cleaning rod – Bore brush
How To Install Ak 47 Rear Sight
Installing the rear sight on an AK-47 is a relatively simple process that can be completed in a few minutes. To install the rear sight, you will need the following tools:
- A Phillips head screwdriver
- A punch
- A hammer
Once you have gathered the necessary tools, you can begin the installation process. First, remove the old rear sight by unscrewing the two screws that hold it in place. Once the screws are removed, carefully lift the rear sight off the rifle.
Next, align the new rear sight with the dovetail on the rifle. Once the sight is aligned, carefully tap it into place using a punch and hammer. Be sure to tap the sight in evenly so that it is securely seated.
Finally, screw in the two screws that hold the rear sight in place. Tighten the screws until they are snug, but do not overtighten them.
People Also Ask About
How do I adjust the AK-47 rear sight?
To adjust the AK-47 rear sight, you will need to use a punch and hammer. First, tap the punch into the hole on the side of the rear sight. This will allow you to adjust the sight up or down. Once the sight is adjusted to the desired height, tap the punch back into place to secure it.
How do I remove the AK-47 rear sight?
To remove the AK-47 rear sight, you will need to unscrew the two screws that hold it in place. Once the screws are removed, carefully lift the rear sight off the rifle.
How do I replace the AK-47 rear sight spring?
To replace the AK-47 rear sight spring, you will need to unscrew the two screws that hold the rear sight in place. Once the screws are removed, carefully lift the rear sight off the rifle. Next, remove the old spring and replace it with the new spring. Finally, reassemble the rear sight and tighten the screws.
